| Steel ball bearing (pcs) | 2 |
| Lifetime lubricated | maintenance free |
| Motor technology |
3-phase asynchronous drive (no brushes or sensors) |
| Frequency | 1000 Hz |
| Motor poles (pairs) | 1 |
| Rated Rotation Speed | 60,000 rpm |
| Rated Power (Pmax/5s) | 0.24 kW |
| Rated Power (S6-60%) | 0.24 kW |
| Rated Power (S1-100%) | 0.18 kW |
| Voltage (Pmax/5s) | 46 V |
| Voltage (S6-60%) | 46 V |
| Voltage (S1-100%) | 44 V |
| Current (Pmax/5s) | 6.5 A |
| Current (S6-60%) | 6.5 A |
| Current (S1-100%) | 5.5 A |
| Housing | Aluminium |
| Housing diameter | 33 mm |
| Cooling | Uncooled |
| Heat dissipation | Via the spindle holder |
| Housing temperature | <+ 45° C |
| Ambient temperature | + 10°C … + 45°C |
| Sealing Air | yes |
| Protection category | IP54 |
| Tool Change | Manual tool change |
| Tool Holder |
Grinding wheel maximum dia.18 mm maximum t =4 - 6 mm |
| Clamping range | Ø7 h6 - M5 |
| Direction of motion | Clockwise |
| Coupler plug |
7-pin (Amphenol C16-1) Cable length 3 m |
| Weight | 0.65 kg |
| Axial run-out | <1 µ |
