| Hybrid ball bearing (pcs) | 2 |
| Lifetime lubricated | maintenance free |
| Motor technology |
3-phase asynchronous drive (no brushes or sensors) |
| Frequency | 2000 Hz |
| Motor poles (pairs) | 2 |
| Rated Rotation Speed | 60,000 rpm |
| Rated Power (Pmax/5s) | 2.1 kW |
| Rated Power (S6-60%) | 1 kW |
| Rated Power (S1-100%) | 0.9 kW |
| Voltage (Pmax/5s) | 192 V |
| Voltage (S6-60%) | 154 V |
| Voltage (S1-100%) | 167 V |
| Current (Pmax/5s) | 9 A |
| Current (S6-60%) | 5.5 A |
| Current (S1-100%) | 4.6 A |
| Speed Sensor |
Differential magneto resistor (TTL) Number of signals = 6 |
| Motor protection | PTC 160°C |
| Housing | Stainless steel |
| Housing diameter | 61,9 mm |
| Cooling | Uncooled |
| Heat dissipation | Via the spindle holder |
| Housing temperature | <+ 45° C |
| Ambient temperature | + 10°C … + 45°C |
| Sealing Air | yes |
| Protection category | IP54 |
| Taper Cleaning | yes |
| Tool Change | Pneumatic taper change |
| Tool Holder | WK 16 |
| Collet type |
ER 11 / D 6 Optional accessories |
| Clamping range | 7 mm ( 9/32" ) |
| Direction of motion | Clockwise and anticlockwise |
| Coupler plug | 9-pin (SpeedTEC) |
| Weight | 3.8 kg |
| Concentricity | <1 µ |
| Axial run-out | <1 µ |
